Una piastra ortotropa quadrata stratificata è completamente fissata nel suo punto centrale e sottoposta a pressione. Compare the deflections of the plate corners to check the correctness of the transformation.
Dimostra che l'accoppiamento di diversi elementi dimensionali non influisce sui risultati. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.
Quattro colonne sono fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Una fune di acciaio o una membrana con perni su entrambe le estremità è caricata da un carico distribuito. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Determina il momento flettente che, agendo all'estremità libera dello sbalzo, piegherà l'asta in una forma circolare. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
A structure is made of two trusses, which are embedded into the hinge supports. The structure is loaded by concentrated force. Il peso proprio è trascurato. Determine the relationship between the loading force and the deflection, considering large deformations.
Uno sbalzo con profilo a I è supportato sull'estremità sinistra e caricato dalla coppia. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
Una mensola è caricata dalla forza concentrata alla sua estremità libera. Determine the maximum deflection of the console using large deformation analysis.
Uno sbalzo è caricato da una forza trasversale e assiale sull'estremità destra ed è completamente fissato sull'estremità sinistra. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Un'asta leggermente inclinata è caricata da una forza concentrata, trattenuta da una molla ad un'estremità e supportata all'altra estremità. Assuming large deformations and neglecting the member's self-weight, determine its maximum upward deflection.
A structure is made of two trusses of unequal length, which are embedded into the hinge supports. The structure is loaded by concentrated force. Il peso proprio è trascurato. Determine the relationship between the loading force and the deflection, considering large deformations.
Uno sbalzo a parete sottile di un profilo QRO è completamente fissato all'estremità sinistra e l'ingobbamento è abilitato. The cantilever is subjected to torque. Small deformations are considered, and the self-weight is neglected. Determine the maximum rotation, primary moment, secondary moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Uno sbalzo è caricato di un momento alla sua estremità libera. Using the geometrically linear analysis and large deformation analysis, and neglecting the beam's self-weight, determine the maximum deflections at the free end. The verification example is based on the example introduced by Gensichen and Lumpe.
Un'asta con le condizioni al contorno date è caricata dal momento torcente e dalla forza assiale. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
Analisi time history di una trave a sbalzo (sistema SDOF) eccitata da una funzione periodica. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
Una piastra di Kirchhoff rettangolare semplicemente supportata è soggetta sia a una pressione laterale uniforme che a un carico distribuito. The maximum out-of-plane deflection is determined by assuming small deformations.
Una piastra ellittica con un contorno bloccato è soggetta a un carico trasversale uniformemente distribuito. Assuming the small deformation theory and neglecting the self‑weight, the maximum out‑of‑plane deflection of the plate is determined.
Una piastra triangolare equilatera semplicemente supportata è soggetta ad un carico trasversale uniformemente distribuito. Assuming the small deformation theory and neglecting self‑weight, the maximum out‑of‑plane deflection of the plate is determined.
Una piastra rettangolare semplicemente supportata è soggetta a diversi tipi di carico. Assuming only the small deformation theory and neglecting self-weight, determine the deflection at its centroid for each load type.
Una forza concentrata viene applicata improvvisamente a metà campata di una trave semplicemente supportata in un dato momento. Considering only the small deformation theory, determine the maximum deflection of the beam.
Una forza concentrata viene applicata per un breve periodo di tempo a metà campata di una trave semplicemente vincolata. Considering only the small deformation theory and assuming that the mass of the beam is concentrated at its mid‑span, determine its maximum deflection.
Un'asta di acciaio tra due supporti rigidi con uno spazio vuoto è caricata da una differenza di temperatura. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Una trave incernierata con una sezione trasversale rettangolare è soggetta a carico distribuito e spostata verticalmente per eccentricità. Considering the small deformation theory, neglecting the self‑weight, and assuming that the beam is made of isotropic elastic material, determine the maximum deflection.
Un'asta ASTM A992 a forma di W è selezionata per sopportare un carico permanente di 30.000 kip e un carico variabile di 90.000 kip in trazione. Verify the member strength using both LRFD and ASD.
Considera una trave ASTM A992 W 18×50 per campata e carichi permanenti e permanenti uniformi come mostrato nella Figura 1. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
La Figura 1 mostra una trave ASTM A992 W 24×62 con taglio alle estremità di 48.000 e 145.000 kip rispettivamente dai carichi permanenti e variabili. Verify the available shear strength of the selected beam, based on LRFD and ASD.
Un tubo con una sezione trasversale tubolare è caricato dalla pressione interna. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Determine the axial deformation of the pipe endpoint.
Una struttura è composta da quattro aste reticolari, che sono incastonate nei vincoli esterni delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Una struttura poco profonda simmetrica è composta da otto aste reticolari uguali, che sono incorporate nei supporti delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.